logo fulling motor
hybrid stepper

HYBRID STEPPER

A stepper motor is an electromechanical device which converts electrical pulses into discrete mechanical movements. The shaft or spindle of a stepper motor rotates indiscrete step increments when electrical command pulses are applied to it in the proper sequence. The motors rotation has several direct relationships to these applied input pulses. The sequence of the applied pulses is directly related to the direction of motor shafts rotation. The speed of the motor shafts rotation is directly related to the frequency of the input pulses and the length of rotation is directly related to the number of input pulses applied. Wide range of Gearboxes also available

brushless motor

BRUSHLESS MOTOR

A brushless DC motor (BLDC) is a synchronous electric motor which is powered by direct-current electricity (DC) and which has an electronically controlled commutation system, instead of a mechanical commutation system based on brushes. In such motors, current and torque, voltage and rpm are linearly related. Wide range of Gearboxes also available

pm_stepping_motor

PM STEPPING MOTOR

Often referred to as a “tin can” or“ can stack” motor the permanent magnet step motor is a low cost and low resolution type motor with typical step angles of 7.5 to 15° (48 – 24steps/revolution) PM motors as the name implies have permanent magnets added to the motor structure. The rotor no longer has teeth as with the VR motor. Instead the rotor is magnetized with alternating north and south poles situated in a straight line parallel to the rotor shaft. These magnetized rotor poles provide an increased magnetic flux intensity and because of this the PM motor exhibits improved torque characteristics when compared with the VR type.

ac servo motor

AC SERVO MOTOR

A Servo Motor is defined as an automatic device that uses an error-correction routine to correct its motion. The term servo can be applied to systems other than a Servo Motor; systems that use a feedback mechanism such as an encoder or other feedback device to control the motion parameters. Typically when the term servo is used it applies to a 'Servo Motor' but is also used as a general control term, meaning that a feedback loop is used to position an item.

SIZE All 40 60 80
Rated Torque All 0.32 1.27 3.18
special solutions

special solutions

Fulling Motor can develop all kinds of stepping motor, DC motor, AC motor, DC brushless driver, Mechanical Component to match customer demands. Our strong R/D team will be available for any special request. If you don't find what you are looking for in our catalog don't esitate to conatct us See here some of our Special Solutions.

news

NEW Flat Brushless 32BLW18

NEW Flat Brushless 32BLW18

BLDC flat motors are the ideal solution for many applications due to their compact, flat design (32mm diameter; length

Download the documentation

continue . . .

New 57BLSH Brushless Motor

New 57BLSH Brushless Motor

Fulling Motor is launching two new brushless, three-phase motors onto the market: 57BLSH40 and 57BLSH60. These two products are increasing the already wide range of Fulling Motor BLDC motors. These squares, 57 mm motors offer torque up to 0.6 Nm and reaching a power of 188 W.

Download the documentation

continue . . .

FULLING MOTOR VIDEO

FULLING MOTOR VIDEO

Have a look to our New Video

continue . . .

New Factory opening

New Factory opening

Dear Customer, The new plant of Fulling Motor has been completed. The detailed address is #69 Kunlun Road, located in the north of old factory, just 3 minutes’ drive. The area of new plant is 3 times larger than original one, up to 18,000 square meters. We decided to move to the new plant from [...]

continue . . .

Fulling is now ISO14001

Fulling is now ISO14001

ISO 14001:2004 sets out the criteria for an environmental management system and can be certified to. It does not state requirements for environmental performance, but maps out a framework that a company or organization can follow to set up an effective environmental management system. It can be used by any organization regardless of its activity [...]

continue . . .

New Flat Stepper 28S10

New Flat Stepper 28S10

New Flat stepper 28S10 (only 9.5mm high), 2-phase, high-torque stepper motor with a 28 x 34-mm flange size, a step angle (full step) of 1.8°, high torque and speeds up to 4500rpm. This stepper motor was specially designed for feeder applications in the semiconductor industry. Its high speeds make it of interest for a wide [...]

Download the documentation

continue . . .

The new range of 3 phase stepper motors

The new range of 3 phase stepper motors

By increasing the number of phases, the step angle gets smaller and the vibrations decrease. The 3-phase stepping motor offers a middle course between the 2-phase stepping motor (standard) and the 5-phase stepping motor with its very small step angle and very low vibrations. The new range include sizes: 42mm, 57mm and 86mm. Each size [...]

continue . . .

New 45mm Flat Brushless

New 45mm Flat Brushless

The new BLDC flat motors from Fulling are the ideal solution for many applications due to their compact, flat design (45mm diameter; length <30 mm). In the new 45BLW motors (16 poles design), the permanent magnets are located on the external rotor which rotate around the internal stator with the windings. In addition to the [...]

continue . . .

Fulling Press Release

Fulling Press Release

Developing 15 to 20 new items every year and offering OEM/ODM service. We’ve been making motors and drivers since 2000. Founded as a joint venture between investors based in Germany, Italy and China, we now export to clients in more than 30 countries. Our buyers source our products to install them in medical equipment, printers, [...]

Download the documentation

continue . . .

Fulling 57HBL: new Brushless DC motors

Fulling 57HBL: new Brushless DC motors

The new brushless DC motors 57HBL: almost twice the torque of their predecessors with no increase in dimensions, making them an ideal choice for use in a wide range of textile processing, pumping, banking automation and similar applications, particularly when space is at a premium. The performance improvements in the new motors have been achieved [...]

continue . . .

63S10 ultra flat stepper motor

63S10 ultra flat stepper motor

The ultraflat, high torque Fulling-63S10 stepper motors with a step angle of 1.8° supports designers who require maximum torque and high positional accuracy combined with minimum overall height. This product when operated in microstep can achieve positional accuracy to < 0.02° and with the right driver it can even run as a brushless motor. Thanks [...]

continue . . .

New Fulling High Torque Brushless 42mm

New Fulling High Torque Brushless 42mm

This new Brushless motor with integrated Hall sensors provides an excellent performance in a very small package. The high energy permanent magnets used in our BLDC motors produce very high efficiency and acceleration with peak torque that can reach 1.44 Nm. The configuration of the stator (10 poles) increases the torque Constant value up to [...]

continue . . .

New Fulling Brushless 33 and 42mm

New Fulling Brushless 33 and 42mm

These new Brushless motors with integrated hall sensor provides very good performances in small volume. The high energy permanent magnet used in our BLDC motors produce a very high efficiency and acceleration with peak torque that can reach 0,45 Nm. Their linear torque curve allows them to be used in a very large speed range [...]

continue . . .